Basics

A Sharp Knife and a Steady Board

Most of home cooking is cutting things up. One knife that cuts cleanly, held properly on a board that does not move, makes every other step easier.

Sharp is safer than blunt

People assume a blunt knife is the careful choice. It is the opposite. A sharp edge bites into food where you put it; a blunt one skates across a tomato skin or an onion's curve, and the hand pushes harder to compensate. When it finally slips, it slips with force behind it. Sharpness also shows on the plate: a clean cut leaves fewer crushed cells, so herbs stay green, onions weep less and salad keeps its crispness longer.

Three knives, and that is enough

Buy the chef's knife first and spend most of the budget there. Hold a few before choosing: weight and balance matter more than the name stamped on the blade, and a knife that feels wrong in your hand will stay in the drawer.

How to hold it

  1. Pinch the blade just in front of the handle between thumb and forefinger, and wrap the remaining fingers round the handle. The knife becomes an extension of the arm instead of a hammer.
  2. Curl the fingertips of the other hand under, knuckles forward, and let the flat of the blade rest lightly against those knuckles as a guide.
  3. Move the knife forward and down rather than straight down. Most cuts are a slicing motion, not a chop.
  4. Go slowly. Speed in a kitchen comes from not stopping, not from moving fast.

The board underneath

A cutting board that slides is a real hazard, so put a damp cloth or a thin sheet of kitchen paper underneath it. Choose wood or plastic; glass, stone and ceramic boards blunt an edge quickly and offer nothing in return. Give yourself a board big enough that chopped food can be pushed to one side instead of falling off, and keep a separate board, or a clear order of work, for raw meat and fish. Wash boards in hot soapy water and stand them on edge to dry rather than leaving them flat in a puddle.

Honing and sharpening are different jobs

A knife's edge is a very thin strip of steel that rolls over sideways with use. Running the blade along a honing steel straightens that strip; it removes almost no metal and takes a few seconds, which is why many cooks do it briefly before each session. When honing stops helping, the edge has actually worn away and needs grinding back on a sharpening stone or by someone who sharpens knives for a living. Finer, harder blades are usually ground to a narrower angle than sturdy European ones, so follow what the maker suggests for your knife rather than a single number.

Testing the edge

Try to slice a ripe tomato using the knife's own weight and no pressure. A sharp blade starts through the skin where it lands. A blunt one rolls, dents the fruit and then plunges in. Paper works as a test too: a sharp knife draws a long clean cut, while a blunt one tears and catches.

Looking after them

If only one thing changes this week, get your chef's knife properly sharpened and keep a damp cloth under the board. Prep stops feeling like a chore.

Last cooked and checked 2026-11-16